A simple way to work out quantities before you buy, and the three things that make real-world coverage lower than the number on the tin.
Buying short means a second trip and a possible batch difference. Buying long means tins sitting in a store room going off. Here is how to get close.
The basic sum
For interior walls, the quick method most painters use:
- Wall area = floor area of the room × 3.5 (a rough multiplier for a standard-height room with normal openings)
- Litres per coat = wall area ÷ coverage per litre
- Total = litres per coat × number of coats
A 12 × 14 ft bedroom is about 168 sq ft of floor, so roughly 590 sq ft of wall. At an honest 100 sq ft per litre, that is about 6 litres per coat, or 12 litres for two coats.
Why real coverage is lower than the tin says
Stated coverage is measured on a smooth, sealed, primed surface. Three things reduce it:
- Surface texture. Rough plaster can take 20–30% more than smooth putty.
- Porosity. A fresh or unprimed wall drinks the first coat. This is what primer is for — it is cheaper than a third coat of finish paint.
- Colour change. Going from dark to light, or using a strong colour over white, often needs three coats rather than two.
Rules of thumb
- Interior emulsion, smooth primed wall: ~110–130 sq ft per litre per coat
- Interior emulsion, rough or fresh plaster: ~80–100 sq ft per litre per coat
- Exterior emulsion on textured plaster: ~60–80 sq ft per litre per coat
- Enamel on wood or metal: ~140–160 sq ft per litre per coat
- Primer: ~100–120 sq ft per litre
Order 10% extra, once
Add about 10% for touch-ups and keep it sealed. A small tin of the exact batch two years later is worth more than the money it costs — repainting one patch with a fresh mix almost always shows.
Or just bring the plan
If you bring a floor plan with room sizes, we will work out quantities per room, per coat, including primer and putty, and write it down for you. It takes a few minutes at the counter and it is free.